Skip to main content

J&M Mechanical Services

SERVICES

Commercial mechanical services from installation to completion

Eighteen scopes under one commercial mechanical contractor — installation, fabrication, ventilation, controls, and the planning work that comes before them.

01

Commercial HVAC Installation

As a commercial HVAC contractor, J&M installs complete cooling and heating systems for buildings that cannot afford guesswork. We confirm equipment capacity against the actual space, set units on properly supported curbs or pads, connect supply and return duct with the transitions the system really needs, and verify airflow and operation before we leave. Our crews work in occupied buildings as often as empty ones, so installations are sequenced around business hours, tenant access, and other trades. Whether the project is a single unit replacement or a full building’s mechanical package, the finished commercial HVAC installation is documented, tested, and ready for inspection.

Commercial applications
  • Office buildings
  • Retail centers
  • Restaurants
  • Industrial facilities
02

New Construction Mechanical

New construction HVAC work rewards contractors who show up prepared. J&M reviews mechanical plans early, flags conflicts with structure and other trades, and lays out duct and equipment before fabrication starts. We coordinate with general contractors, developers, and construction managers on delivery dates, rigging access, and inspection milestones so the mechanical scope does not become the schedule’s bottleneck. Ductwork, rooftop units, exhaust, and controls are installed as a coordinated system and started up together. Our experience as a commercial mechanical contractor across the Atlanta market means fewer surprises in the field and a cleaner path to closeout.

Commercial applications
  • Ground-up commercial
  • Restaurant builds
  • Warehouse & industrial
  • Mixed-use
03

Commercial Remodels

Remodels and tenant build-outs almost always mean working with what is already there. J&M evaluates existing equipment and duct, determines what can be reused, and reworks the rest so the new floor plan actually gets conditioned air where it is needed. We handle demolition of abandoned duct, new distribution, diffuser and grille layout, equipment relocation, and control changes. Because remodel work often happens in buildings that stay open, we plan phasing and after-hours work to keep neighboring tenants comfortable and the job moving.

Commercial applications
  • Tenant build-outs
  • Restaurant conversions
  • Retail refreshes
  • Office reconfiguration
04

HVAC Changeouts

When commercial equipment reaches the end of its life, a changeout has to be planned, not improvised. J&M handles commercial HVAC changeouts from start to finish: confirming replacement capacity, coordinating crane or rigging access, removing the old unit, adapting or replacing the curb, modifying duct and electrical connections, and starting up the new equipment. We schedule the swap around your operating hours so restaurants and businesses lose as little time as possible, and we leave the roof and surrounding areas clean and properly sealed.

Commercial applications
  • Aging rooftop units
  • Failed equipment
  • Efficiency upgrades
  • Property turnovers
05

Grease Hood Installation

Commercial grease hood installation is one of the services J&M is best known for. We set stainless kitchen hoods over the cook line at the right height and coverage, connect the grease duct riser, install exhaust fans and make-up air, and balance the system so the kitchen stays workable instead of smoky or negatively pressurized. As a restaurant ventilation contractor, we understand how hood work interacts with the rest of the kitchen — gas equipment, fire suppression, ceiling construction, and health inspection expectations — and we coordinate accordingly.

Commercial applications
  • New restaurants
  • Kitchen remodels
  • Ghost kitchens
  • Institutional kitchens
06

Grease Duct Welding

Grease duct has to be liquid-tight, and that means welded. Our crews fabricate and weld black iron grease duct for commercial kitchen exhaust systems, including risers, offsets around structure, roof penetration coordination, access doors, and the final connection to the exhaust fan. Welded seams are inspected before enclosure so the system is ready for the authority having jurisdiction. If a restaurant’s existing grease duct is failing, leaking, or was never built correctly, we can evaluate it and rebuild the sections that need it.

Commercial applications
  • Restaurant kitchens
  • Food production
  • Hotels & banquet
  • Retrofits
07

Low Voltage Control Wiring

Good equipment installed with bad controls still performs badly. J&M installs low-voltage control wiring for commercial HVAC systems — thermostats and sensors, unit controllers, economizers, exhaust interlocks, and hood control panels. We verify that staging, setpoints, and safeties behave the way the equipment schedule intended, and we label the work so future service calls are straightforward. Control wiring is coordinated with the electrical contractor so line-voltage and low-voltage scopes meet cleanly.

Commercial applications
  • Thermostat & sensors
  • Economizer controls
  • Hood interlocks
  • Equipment controllers
08

Duct Installation

Commercial ductwork carries every dollar you spend on equipment. J&M fabricates and installs rectangular, round, and spiral duct systems, including hangers, transitions, dampers, insulation, and diffusers. Our field crews install to the layout and seal joints so the system delivers designed airflow instead of losing it into a ceiling. We install commercial ductwork in new buildings, remodels, kitchens, and industrial spaces, and we fabricate fittings in-house to keep installation moving without waiting on outside suppliers.

Commercial applications
  • New buildings
  • Duct replacement
  • Kitchen exhaust duct
  • Industrial ventilation
09

Exhaust Fan Installation

Commercial exhaust systems remove heat, humidity, fumes, and grease-laden air, and the fan is the part that decides whether that happens. We install upblast kitchen exhaust fans, general building exhaust, inline and utility-set fans, and make-up air units — with new curbs where needed, grease containment, proper electrical connection coordination, and safe roof access. After installation, the exhaust and make-up air are checked together so the building is not left fighting itself with pressure problems.

Commercial applications
  • Kitchen exhaust
  • Restroom & general exhaust
  • Warehouse ventilation
  • Make-up air
10

Air Curtains

Air curtains hold conditioned air inside and keep insects, dust, and outside temperature at the door. J&M installs commercial air curtains at entrances, drive-thru windows, loading docks, and walk-in cooler openings, sized and mounted so the air stream actually reaches the floor. We handle mounting, electrical coordination, door switch integration, and adjustment so the unit runs when it should. Air curtains are a small scope with a noticeable effect on comfort, energy use, and health inspection results.

Commercial applications
  • Restaurant entries
  • Loading docks
  • Drive-thru windows
  • Cooler openings
11

Commercial Heaters

Warehouses, shops, and industrial spaces often need heating that packaged rooftop equipment cannot deliver efficiently. J&M installs commercial heaters including unit heaters, gas-fired and infrared heaters, and make-up air heating for spaces with high exhaust rates. We coordinate gas piping and electrical connections, mount and vent equipment correctly, and set controls so the space is kept at a workable temperature without wasting fuel. Heating scopes are commonly combined with ventilation work so both sides of the air balance are handled at once.

Commercial applications
  • Warehouses
  • Shops & garages
  • Industrial plants
  • Loading areas
12

Commercial Fans

Beyond kitchen exhaust, commercial buildings rely on fans for ventilation, cooling, smoke control, and process air. J&M supplies and installs commercial fans — roof and wall-mounted exhaust, inline fans, supply fans, and high-volume circulation fans — including curbs, ductwork connections, guards, and control wiring. We size and place fans so airflow reaches the areas that need it, and we service or replace failed fans on existing systems when downtime is the real problem to solve.

Commercial applications
  • Building ventilation
  • Process exhaust
  • Air circulation
  • Fan replacement
13

Mini Split Installation

Mini-split systems solve problems central equipment cannot: server rooms and IT closets, offices carved out of warehouse space, break rooms, guard shacks, and additions with no duct path. J&M installs commercial mini-split systems including single-zone and multi-zone equipment, line set routing, condensate handling, outdoor unit mounting, and controls. We install them where they make sense as a long-term solution rather than a patch, and we set them up so maintenance can actually reach the equipment later.

Commercial applications
  • Server & IT rooms
  • Office additions
  • Warehouse offices
  • Spot cooling
14

Rooftop Units / RTUs

Rooftop units carry most commercial buildings, and RTU installation is core work for J&M. We handle new RTU installation and replacement across common tonnages: curb setting or adaptation, crane and rigging coordination, duct transitions, economizer and control setup, condensate and gas connections, and full startup. We also correct earlier installations where curbs leak, duct connections are undersized, or units were never commissioned properly. Commercial rooftop HVAC units installed right stay serviceable and efficient for their full life.

Commercial applications
  • Retail & office roofs
  • Restaurants
  • Industrial buildings
  • Multi-unit properties
15

Duct Design

Duct design decides whether a system delivers its rated capacity. J&M provides duct design and layout support that accounts for airflow requirements, static pressure, available ceiling space, equipment locations, and coordination with structure, sprinkler, and electrical. Designing before fabrication cuts field changes, reduces noise complaints, and keeps balancing achievable. We can design from scratch or refine an engineer’s drawings into something installable within the building’s real constraints.

Commercial applications
  • New buildings
  • Remodels
  • Kitchen exhaust layout
  • System upgrades
16

Engineering Support

Plans occasionally leave questions the field has to answer. J&M offers practical engineering support on equipment selection, system layout, capacity confirmation, code considerations, and constructability review. Owners and contractors bring us in when a mechanical design needs a second look before bidding or when an existing system has to be expanded. Our input comes from decades of installing these systems, so the recommendations account for how the work will actually be built, serviced, and inspected.

Commercial applications
  • Plan review
  • Equipment selection
  • Value engineering
  • System expansion
17

HVAC Troubleshooting

Commercial HVAC troubleshooting means finding the real cause, not just the symptom. J&M diagnoses airflow problems, short cycling, hot and cold spots, failed compressors and motors, control faults, refrigerant issues, and ventilation imbalance in restaurants and commercial buildings. We report what we find, what it will take to fix, and whether repair or replacement is the better spend. For systems that were never installed correctly, we explain the underlying issue so the same failure does not repeat next season.

Commercial applications
  • Restaurants
  • Office & retail
  • Industrial
  • Property management
18

Takeoff Estimating

Contractors bidding commercial work need mechanical numbers they can rely on. J&M performs takeoff estimating from plans and specifications — duct quantities and sizes, equipment, fittings, accessories, insulation, and labor — and presents clear, itemized pricing. Accurate takeoffs help general contractors bid competitively without discovering gaps after award, and help owners budget renovations realistically. Send us plans and a timeline and we will let you know what we need to price the mechanical scope.

Commercial applications
  • GC bidding
  • Owner budgeting
  • Scope comparison
  • Change orders

Not sure which scope your project needs?

Send plans or describe the problem. We will tell you what the mechanical work involves and what it should cost.